solid tantalum chip capacitors t antamount ? , ultra-low esr, conformal coated, maximum cv 597d vishay sprague document number: 40047 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 01-aug-08 107 features ? new case size offerings ? case profiles: e case (4 mm) and r case (3.6 mm) ? low profile case: v case (2 mm) ? terminations: tin (2) standard ? extremely low esr ? ripple current up to 4.1 a capacitance range: 15 f to 1500 f capacitance tolerance: 10 %, 20 % standard voltage rating: 4 wvdc to 63 wvdc performance characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) note: refer to doc. 40088 ordering information 597d 687 x0 6r3 e 2 t type capacitance capacitance tolerance dc voltage rating at + 85 c case code termination reel size and packaging this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an ?r? (6r3 = 6.3 v). see ratings and case codes table 2 = 100 % tin 8 = solder plated (60/40) special order t =tape and reel 7" [500] reel w = 13" [n/a] reel note: preferred tolerance and reel sizes are in bold. we reserve the right to supply higher voltage ratings and tight er capacitance tolerance capac itors in the same case size voltage substitutions will be ma rked with the higher voltage rating dimensions in inches [millimeters] case code l (max.) w h a b d (ref.) j (max.) e 0.287 0.012 [7.3 0.3] 0.173 0.016 [4.4 0.4] 0.157 0.016 [4.0 0.4] 0.051 0.012 [1.3 0.3] 0.180 0.025 [4.6 0.6] 0.253 [6.4] 0.004 [0.1] f 0.287 0.012 [7.3 0.3] 0.238 0.016 [6.0 0.4] 0.187 0.016 [4.7 0.4] 0.051 0.012 [1.3 0.3] 0.180 0.025 [4.6 0.6] 0.243 [6.2] 0.004 [0.1] r 0.287 0.012 [7.3 0.3] 0.238 + 0.016/- 0.024 [6.0 + 0.4/- 0.6] 0.142 0.016 [3.6 0.4] 0.051 0.012 [1.3 0.3] 0.180 0.025 [4.6 0.6] 0.243 [6.2] 0.004 [0.1] v 0.287 0.012 [7.3 0.3] 0.173 0.016 [4.4 0.4] 0.079 [2.0] max. 0.051 0.012 [1.3 0.3] 0.180 0.025 [4.6 0.6] 0.253 [6.4] 0.004 [0.1] z 0.287 0.012 [7.3 0.3] 0.238 0.016 [6.0 0.4] 0.238 0.016 [6.0 0.4] 0.051 0.012 [1.3 0.3] 0.180 0.025 [4.6 0.6] 0.243 [6.2] 0.004 [0.1] note: the anode termination (d less b) will be a minimum of 0.012" [0.3 mm] * pb containing terminations are not rohs compliant, exemptions may apply j h b a d l tantalum wire nib identifies anode (+) terminal w a v aila b le p b -free rohs * compliant
597d vishay sprague solid tantalum ch ip capacitors t antamount ? , ultra-low esr, conformal coated, maximum cv www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40047 108 revision: 01-aug-08 note: * contact factory for availability ratings and case code f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 63 v 75 v 10 15 e/r 22 rf* 33 f 47 rz* 68 r 100 150 f 220 e r 330 v e f* 470 v e e f* 680 e e r 1000 e/r r 1500 r 2200 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz (m ) max. ripple 100 khz irms (a) 4 wvdc at + 85 c, surge = 5.2 v . . . 2.7 wvdc at + 125 c, surge = 3.4 v 470 v 597d477x_004v__ 19 8 30 2.2 680 e 597d687x_004e__ 27 6 25 2.9 1000 e 597d108x_004e__ 40 8 20 3.3 1000 r 597d108x_004r__ 40 8 18 3.7 1500 r 597d158x_004r__ 60 8 15 4.1 6.3 wvdc at + 85 c, surge = 8 v . . . 4 wvdc at + 125 c, surge = 5 v 330 v 597d337x_6r3v__ 21 8 35 2.0 470 e 597d477x_6r3e__ 30 6 30 2.7 680 e 597d687x_6r3e__ 43 6 25 2.9 1000 r 597d108x_6r3r__ 63 8 20 3.5 10 wvdc at + 85 c, surge = 13 v . . . 7 wvdc at + 125 c, surge = 8 v 330 e 597d337x_010e__ 33 6 35 2.5 470 e 597d477x_010e__ 47 6 28 2.8 680 r 597d687x_010r__ 68 6 28 2.9 16 wvdc at + 85 c, surge = 20 v . . . 10 wvdc at + 125 c, surge = 12 v 220 e 597d227x_016e__ 35 8 40 2.3 470 f 597d477x_016f__ * 75 14 100 1.4 20 wvdc at + 85 c, surge = 26 v . . . 13 wvdc at + 125 c, surge = 16 v 220 r 597d227x_020r__ 44 8 80 1.8 330 f 597d337x_020f__* 66 10 100 1.4 25 wvdc at + 85 c, surge = 32 v . . . 17 wvdc at + 125 c, surge = 20 v 68 r 597d686x_025r__ 17 6 100 1.6 150 f 597d157x_025f__ 38 8 80 1.8 35 wvdc at + 85 c, surge = 46 v . . . 23 wvdc at + 125 c, surge = 28 v 47 r 597d476x_035r__ 17 6 80 1.8 50 wvdc at + 85 c, surge = 65 v . . . 33 wvdc at + 125 c, surge = 38 v 15 e 597d156x_050e__ 8 6 300 0.8 15 r 597d156x_050r__ 8 6 250 1.0 22 r 597d226x_050r__ 11 6 170 0.8 33 f 597d336x_050f__ 17 6 150 0.8 47 z 597d476x_050z__* 24 6 145 1.1 63 wvdc at + 85 c, surge = 81 v . . . 42 wvdc at + 125 c, surge = 54 v 22 f 597d226x_063f__* 14 6 200 0.9
document number: 40047 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 01-aug-08 109 597d solid tantalum chip capacitors t antamount ? , ultra-low esr, conformal coated, maximum cv vishay sprague typical curves 100 hz 1 khz 10 khz 100 khz 1 mhz 0.01 0.1 1 frequency esr z esr and z ( ) t97 1500 f - 4 v 'r' case size esr and z vs. frequency 0.01 0.1 1 frequency (hz ) esr z 100 hz 1 khz 10 khz 100 khz 1 mhz esr and z ( ) t97 330 f - 10 v ' e ' case size esr and z vs. frequency 0.01 0.1 1 esr z 100 hz 1 khz 10 khz 100 khz 1 mhz frequency esr and z ( ) t97 1000 f - 4 v 'e' case size esr and z vs. frequency 0.01 0.1 1 frequency esr z 100 hz 1 khz 10 khz 100 khz 1 mhz esr and z ( ) t97 1000 f - 6.3 v 'r' case size esr and z vs. frequency 100 hz 1 khz 10 khz 100 khz 1 mh z frequency esr z 0.01 0.1 1 10 esr and z ( ) t97 330 f - 6.3 v ' v ' case size esr and z vs. frequency 0.01 0.1 1 frequency 100 hz 1 khz 10 khz 100 khz 1 mhz 10 esr z esr and z ( ) t97 470 f - 4 v ' v ' case size esr and z vs. frequency
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
